Go to Top

Vacuum Tubes and Accessories

Welcome to the vacuum tubes and accessories section of the Cary Direct Store. Please feel free to contact us if you have any questions regarding the parts below.

All vacuum tubes and accessories purchased from Cary Audio cannot be returned for credit or refund. All sales are final.

Shipping charges are for the United States only. For International customers, you will be contacted by our office after purchase for additional shipping charges.


Genalex Gold Lion PX300B Vacuum Tube

Genalex-Gold-Lion-PX300B

The Genalex Gold Lion PX300B combines traditional construction styling with upgraded materials. Gold plated grids, and contact pins afford these tubes extended life by eliminating opportunities for tone-destroying oxide layers to develop. This tube is the highest quality 300B type available and is considered to be an upgrade in any 300B amplifier.

$600.00 pair


6DJ8 Amperex Bugle Boy Tube

6DJ8-Amperex-Bugle-Boy

The 6DJ8 Amperex Bugle Boy is a dual triode preamplifier tube that was made in the early 1960s in Holland. Its characteristics include creases on the top of the bottle, gray risers, a round shield with two raised rectangular sections on opposite sides, a halo getter with a wide support post, the Heerlen factory code imprinted along the bottom of the glass, and the Amperex Bugle Boy label with “Made in Holland.” This tube is shipped in a new white box.

$100.00 each


6SN7 GT/GTA/GTB Vacuum Tubes

GE-6SN7

New Old Stock (NOS) Vacuum Tubes

Various brands: GE, RCA, Tung-Sol, Rogers, Hytron, Raytheon, Philco, Motorola, CBS, etc.

$105 each


6SL7 GT/WGT Vacuum Tubes

GE_6SL7GT

New Old Stock (NOS) Vacuum Tubes

Various brands: GE, RCA, Tung-Sol, Sylvania, NU, Ken-Rad, etc.

$105 each


Universal Programmable Remote Control

Cinema-12_remote

The new Cary Audio universal programmable remote control was designed to control your entire home theater system with a single device. It comes with a huge internal code library for thousands of devices, as well as all Cary Audio products. In addition it can act as a “learning” remote to accept codes from other remotes not covered in our library. Future downloadable libraries can be added using the built in SD card slot.

$195.00


SLI-80 & SLI-80HS Cage Cover

The SLI-80 and SLI-80HS integrated amplifier cage cover is the perfect addition to help secure your vacuum tubes from little ones running around, pets, or even just for extra protection! The cage cover is made from steel and painted the same finish as the chassis. It was designed to fit over the entire chassis. The bent edges of the cage cover are lined with felt, so it doesn’t rub or scratch the chassis. There are four (4) tapped holes in the cage cover – one in each corner. The cover is shipped with the felt already attached, (4) screws to affix it to the chassis, and an allen wrench.

Please note the holes in the chassis were only added in the last few production runs. Earlier (and all) chassis can still use the cage cover. However, the cage cover on an earlier chassis without the tapped holes will simply sit on top of the SLI-80.

$295.00

 


SLP-05 Cage Cover

The SLP-05 preamplifier cage cover is the perfect addition to help secure your vacuum tubes from little ones running around, pets, or even just for extra protection! The cage cover is made from steel and painted the same finish as the chassis. It was designed to fit over the entire chassis. The bent edges of the cage cover are lined with felt as to not rub or scratch the chassis. There are four (4) tapped holes in the cage cover – one in each corner. The cover is shipped with the felt already attached, (4) screws to affix it to the chassis, and an allen wrench.

Please note the holes in the chassis were only added in the last few production runs. Earlier (and all) chassis can still use the cage cover. However, the cage cover on an earlier chassis without the tapped holes will simply sit on top of the SLP-05.

$295.00


CAD-211FE Cage Cover

The CAD-211FE power amplifier cage cover is the perfect addition to help secure your vacuum tubes from little ones running around, pets, or even just for extra protection! The cage cover is made from steel and painted the same finish as the chassis. It was designed to fit over the entire chassis. The bent edges of the cage cover are lined with felt as to not rub or scratch the chassis. There are eight (8) tapped holes in each cage cover – four (4) on each side. The covers are shipped with the felt already attached, sixteen (16) screws total to affix it to each chassis, and an allen wrench.

Please note the holes in the chassis were only added in the last few production runs. Earlier (and all) chassis can still use the cage cover. However, the cage cover on an earlier chassis without the tapped holes will simply sit on top of the CAD-211FE.

$590.00 (two cage covers total, one per amp)


MA-300

MA-300_front

Using the MA-300 analog bias adjustment meter will simplify the procedure of adjusting the bias on any Cary Audio vacuum tube amplifier. The MA-300 has the main advantage in there is only one clearly defined needle to observe. The user will get an instant reading of the bias current without the worry of a proper scale selection or dead batteries. The MA-300 is strictly a 0-300 ma. analog reading gauge. To operate, simply plug the meter in and make your adjustments. The MA-300 comes complete with a 3 ft. cord and ¼ inch 2 conductor plug.

$110.00





Cary Audio Soft Shoes

softshoe_400                 softshoe_side_400

Cary Audio Soft Shoes are extremely high-quality rubber feet for audio components. These are not little peel-and-stick rubber buttons. At 2 inches in diameter and nearly an inch tall, these feet were designed to support some serious weight. The recessed cup design reduces the contact area and helps the feet stay planted. The medium-density formula is soft enough to cushion your gear yet firm enough to support over 20 pounds each. A recessed hole in the center is provided for mounting with a 6/32 screw and washer. These are the same feet supplied with nearly all Cary Audio products.

$9.00 each

[paypal]

Quantity


Cary Audio Logo T-shirt – Blue

t-shirts_blue_newlogo

100% cotton Hanes Heavyweight T Shirt in navy blue. Cary Audio logo on front, large logo symbol on back. Reads “American Manufacturer of World-Class Music & Cinema Systems” Available in M, L, XL, 2XL $18.00

*Other sizes available upon request. If you are interested in special ordering a different size, please call our office at (919) 355-0010.

Sizes


Cary Audio Logo T-shirt – White

t-shirts_white_newlogo

100% cotton Hanes Heavyweight T Shirt in white. Cary Audio logo on front, large logo symbol on back. Reads “American Manufacturer of World-Class Music & Cinema Systems” Available in M, L, XL, 2XL $18.00

*Other sizes available upon request. If you are interested in special ordering a different size, please call our office at (919) 355-0010.

Sizes


Cary Audio Logo Polo shirt

Polo-Shirt_newlogo

Heading out for a round of golf? The classic Cary Logo Polo shirt will have you hitting the links in style. This 100% cotton polo is made by “Outer Banks” and features an embroidered white Cary Audio logo. Available in navy blue in sizes M, L, XL, 2XL. $30.00

*Other sizes available upon request. If you are interested in special ordering a different size, please call our office at 919-355-0010.

Sizes


 
Be Sociable, Share!
66kbet mix parlay upgrade akun pro