About the CAD-211FE Amplifier
It is well known that using monoblock amplifiers, as opposed to both channels together as a stereo chassis, is the best way to get powerful and lifelike music. By using separate power supplies that can be much more massive, each amplifier can have more dynamic power and be quieter. Keeping two separate amplifiers also makes any inter-channel crosstalk in the amplifiers impossible, so separation is better, meaning your soundstage and musical imaging will be larger and more well-defined. The simple act of separating the two channels provides a lot of distinct advantages, but also increases the investment because of needing to double up on power supplies and chassis parts.
Is this extra expense worth it? One listen to the CAD-211FE will convince you that it most certainly is. With over 70 watts of class-A power, automatically transitioning as needed to over 150 watts in class-AB, this powerhouse will effortlessly drive nearly any speaker to realistic live performance levels. It includes a bias meter on the front panel to help you maintain your amplifier at its peak operating level, and offers both XLR balanced and RCA single-ended inputs to match your system. Fully differentially-balanced construction, zero global feedback, and huge reserves of current and power mean that your system will come alive with all types of music and movies.
The CAD-211FE has removable cage covers available at an additional cost. Talk to your dealer/distributor about purchasing them with your unit, or order it from our Cary Store.
The following section describes the CAD-211FE basic specifications. The specifications are subject to change without notice or obligation.
|Circuit Type||Class A, Class A/B, Class B, Pure Balanced Design|
|Power Output||Up to 150 watts class B
110 Watts, Class A/B
70 Watts, Class A
|Inputs||Single-Ended RCA; Balanced XLR|
|Input Sensitivity||2.0 Volts for full output power|
|Input Impedance||100k Ohms – RCA unbalanced
200k Ohms – Balanced (XLR)
|Noise and Hum||>80 dB below rated output|
|Frequency Response||20 Hz to 20 KHz, + 0.5 dB|
|Tube Complement||1 ea – 6CA7 Current Source Tube
1 ea – 6SL7 Input Tube
2 ea – 300B Driver Stage Tubes
2 ea – 845 Output Tubes
|Power Transformer(s)||1 ea – EI Laminate, 200% Duty Cycle|
|Output Transformer(s)||1 ea – EI Laminate, Air Gap, 200% Duty Cycle|
|Resistors||1% Metal Film|
|Power Supply Capacitors||4 ea – 1500µF @ 450 VDC|
|AC Cord||3 Conductor, Detachable|
|AC Power Requirements||117/234 VAC @ 50/60 Hz|
|Consumption||280 watts – Operation
76 watts – Standby
|Warm-Up Time||5 Minutes|
|Break-In Time||100 hours of playing time|
|Finish||Anthracite black chassis with silver or black aluminum faceplate|
|Dimensions||10″ H x 12.25″ W x 24 ” D|