| Amp Class |
Class D |
| Rated THD |
0.2% |
Power Supplies
|
3 power transformers |
| Cabinet |
All aluminum chassis |
| Mounting Feet |
Custom machined adjustable aluminum feet |
| Speaker Connections |
CARDAS speaker binding posts |
| Analog Inputs |
XLR balanced, RCA unbalanced |
| Front Panel Inset |
Etched Crystal front panel, backlit |
| Remote Turn On |
Rear panel 12 volt on/off trigger with 1/8th inch mono mini plug |
| Frequency Range |
20 Hz - 20 kHz |
| Amplitude Linearity |
+ 0.5 dB (20 Hz - 20 kHz) |
| Signal to Noise |
80 dB, CCIR |
| Input Impedance RCA |
100 k Ohms |
| Input Impedance, XLR |
200 k Ohms |
| Voltage gain |
27 dB |
| Damping Factor |
> 1,000 from 20 Hz-20 kHz |
| Audio Output Level |
600 watts per channel @ 8 Ohms
1,100 watts per channel @ 4 Ohms |
| Power Input |
Configured at the factory for 100-120 or 200-240 Volts AC @ 50-60 Hz |
| Features |
ALL aluminum chassis, with either silver or black anodized finish, fully regulated power supply circuits |
| Power Consumption |
Rated 1200 watts full power and 07 watts during standby operation. |
| Weight |
50 lbs |
| Dimensions |
5" H x 18" W x 15" D |
|
|
The all aluminum chassis has custom machined aluminum cone feet for system leveling. The speaker terminals are CARDAS designs. The A 306 power amplifier has one each balanced of an XLR and a single ended RCA input with an input selector switch for each channel. The back panel includes a remote turn on trigger input for system remote control. This power amplifier will be capable of running low impedance loads with ease, such as electrostatic designs. |
|
Owner's Manual 