| Circuit Type |
Push-Pull, Balanced circuit, Class A Triode,
Class AB Ultra-linear |
| Power Output |
50 watts - Triode
100 watts - Ultra-Linear
Mono Blocks
100 watts - Triode
175 watts - Ultra-Linear |
| Inputs |
RCA Single-ended, XLR Balanced |
| Noise and Hum |
-86 dB below full output |
| Input Impedance |
150k Ohms |
| Frequency Response |
20 Hz to 23 KHz +/- .5 dB |
| Tubes |
12 - EL-34 Outputs (or 6550, KT-88)
2 - EL-84 Current Source (6BQ5)
2 - 12BZ7 Inputs (or 12AY7, 12AX7) |
| Power Transformer(s) |
Dual High-Voltage secondary, one for each channel, EI Laminated 200% duty cycle |
| Output Transformer(s) |
Special EI Laminate
125 watt power continuous rating
Mono Blocks
200 watt power continuous rating |
| Filament Transformer(s) |
Two EI Laminate, 12 amp transformers, one for each channel |
| Resistors |
1% Metal Film |
| Capacitors |
.33µF Film & Foil
.22µF 600 VDC Film & Foil - Mono Blocks |
| Power Supply Capacitors |
4 - 560µF @ 400 VDC
6 - Film & Foil |
| Power Supply Regulators |
2 - MJW 1612, one for each input tube
6 - Film & Foil |
| Speaker Posts |
Gold plated Copper, Common and 4 and 8 Ohm outputs |
| AC Cord |
3 Conductor Shielded, Detachable |
| AC Power Requirements |
100, 117 or 240 VAC @ 50/60 Hz
(Set by market) |
| Warm-Up Time |
3 Minutes |
| Break-In Time |
100 hours of playing time |
| Finish |
Jaguar Carnival Red with clear coat on chassis, black anodized aluminum faceplate standard (silver optional) |
| Weight |
68 lbs
74 lbs - Mono Blocks |
| Dimensions |
8" H x 12.5" W x 18" D
8" H x 12.5" W x 19" D - Mono Blocks |
Owner's Manual
