Products - Cary Classic

SA-200.2
POWER AMPLIFIER

The SA-200.2 is a two channel power amplifier rated at 200 watts per channel into an 8 ohm load and 350 watts per channel into a 4 ohm load. The rear panel has XLR and RCA inputs and a remote turn on trigger. Quiet, low distortion operation with unmatched reliability.




SA-200.2

moreviews
Specifications
Circuit Type Solid State, Class A/B
Power Output

2 x 200 watts @ 8 Ohms
from 20Hz to 20KHz
2 x 350 watts @ 4 Ohms
from 20Hz to 20KHz

Frequency Response 10Hz - 50KHz +/- 0.1 dB
Signal-to-Noise Ratio >100dB, "A" Weighted
Input Impedance

22K Ohms RCA-unbalanced

22K Ohms - Balanced (XLR)

Voltage Gain 28 dB
AC Power Requirements 117/234 Volts AC @ 50/60 Hz
Break-In Time 100 hours of playing time
Finish


 Black epoxy coated steel chassis
Silver anodized aluminum faceplate
(black optional)
Weight 65 lbs
Dimensions 7.75” H x 17.7”W x 19.5 ”D
Audio Input 2 RCA, 2 XLR
Audio Output 2 pairs of heavy-duty, gold-plated binding posts
THD Less than 0.05% at rated output
Damping Factor Greater than 400 from 10Hz to 400Hz
Remote Trigger 3.3-24v DC at 5mA or greater
Resources
 
arrowOwner's Manual PDF
arrowSA Amp White Paper PDF
Highlights

The SA-200.2 power amplifier features include:

  • Single-ended RCA or XLR balanced inputs
  • 200 Watts/8 ohms; 350 Watts/4 ohms
  • Remote trigger (works with +3.3 to +24 Volts DC)
  • Protection against short circuits, device failures, mis-wiring, and internal faults.
  • DC offset protection
  • Matched output transistors
  • High power supply voltage for extra headroom at the outputs
  • Stable with mismatched, reactive or unusual loads
  • Soft start circuit prevents “Brown outs” when amplifier is turned on

In addition, the SA-200.2 includes high quality RCA (gold plated) and XLR input connectors. The SA-200.2 also includes high-quality, heavy duty speaker output connectors. A trigger input connector allows the SA-200.2 to be powered on and off automatically.