| Circuit Type |
Single-Ended Class A |
| Power Output |
15 watts |
| Input Sensitivity |
.42 Volt for full output |
| Noise and Hum |
-90 dB below full output |
| Frequency Response |
20 Hz to 23 KHz +/- .75 dB |
| Inputs |
CD, AUX1, AUX2,
Headphone jack
|
| Tubes |
1 ea - 6SN7 Input
2 ea - 6SN7 Driver
2 ea - 300B Output |
| Power Transformer |
1 ea - EI Laminate, 200% Duty Cycle |
| Output Transformer(s) |
2 ea - EI Laminate
Air Gap, 200% Duty Cycle |
| Resistors |
1% Metal Film |
| Capacitors |
Oil-Filled Coupling |
| Power Supply Capacitors |
2 ea - 1200µF@250 VDC |
| AC Cord |
3 Conductor, Detachable |
| AC Power Requirements |
117/234 VAC @ 50/60 Hz |
| Consumption |
107 watts - Operation |
| Warm-Up Time |
3 Minutes |
| Break-In Time |
100 hours of playing time |
| Finish |
Black Anodized Aluminum Faceplate,
Jaguar blue chassis with
high gloss Clear Coat finish.
Standard with remote control. |
| Weight |
51 lbs |
| Dimensions |
8" H x 14" W x 14" D |
|
|
|
 |
|
 |
It offered exceptional sound staging, with plenty of depth and very specific images of individual musicians. The resolution in the treble was extraordinary. I don’t ever recall hearing a bell ring with such presence, or having the harmonic trail last so long. If you are looking for great pace and timing, this amplifier does it an order of magnitude better than any other amplifier I have heard. |
 |
|
Jerry S
10 Audio |
|
Within its power range, the CAD 300 SEI integrated amplifier offers the most realistic sound reproduction one could desire for a "high-end" home audio system. Careful design, parts selection and proper circuit topologies contribute to incredible reliability and enjoyment. The CAD 300 SEI presents music with presence and directness, a result of single-ended circuit techniques, which eliminate crossover notch at low levels and also contributes to freedom from listening fatigue.
|
|
Owner's Manual