| Circuit Type |
Solid State, Class A/B |
Power Output
|
7 x 125 watts @ 8 Ohms
from 20Hz to 20KHz
7 x 190 watts @ 4 Ohms
from 20Hz to 20KHz |
| Input Sensitivity |
1.0 Volts |
| Frequency Response |
20Hz - 20KHz +/- 0.1 dB |
| Signal-to-Noise Ratio |
>100dB, "A" Weighted |
| Input Impedance |
Nominal 50K Ohms |
| Voltage Gain |
28 dB |
| AC Power Requirements |
117/234 Volts AC @ 50/60 Hz |
| Break-In Time |
100 hours of playing time |
Finish
|
Black epoxy coated steel chassis
Silver anodized aluminum faceplate
(black optional) |
| Weight |
55 lbs |
| Dimensions |
7” H x 17.7”W x 16.6”D |
| Audio Input |
7 RCA, 7 XLR |
| Audio Output |
7 pairs of heavy-duty, gold-plated binding posts |
| THD |
Less than 0.05% at rated output |
| Crosstalk |
Greater than -90dB from 20Hz to 20KHz |
| Damping Factor |
Greater than 400 from 10Hz to 400Hz |
| Slew Rate |
50V/mSec |
| Remote Trigger |
3-32v DC at 5mA or greater |
| Rack Mounting |
Optional brackets are available for mounting the amplifier in a standard 19 inch equipment rack. |
|
| |
The Model 7.125 power amplifier features include:
- Single-ended RCA or XLR balanced inputs
- 125 Watts/8 ohms; 190 Watts/4 ohms
- Remote trigger (works with +3.3 to +24 Volts DC)
- Protection against short circuits, device failures, mis-wiring, and internal faults.
- DC offset protection
- Matched output transistors
- High power supply voltage for extra headroom at the outputs
- Stable with mismatched, reactive or unusual loads
- Soft start circuit prevents “Brown outs” when amplifier is turned on
In addition, the Model 7.125 includes high quality RCA (gold plated) and XLR input connectors. The Model 7.125 also includes high-quality, heavy duty speaker output connectors. A trigger input connector allows the Model 7.125 to be powered on and off automatically. |
|
