Products - Cary Cinema

Model 2.200
POWER AMPLIFIER

The Model 2.200 is a two channel power amplifier rated at 200 watts per channel into an 8 ohm load and 350 watts per channel into a 4 ohm load. The rear panel has XLR and RCA inputs and a remote turn on trigger. With its power output it is capable of driving most multi-channel speaker systems. Quiet, low distortion operation with unmatched reliability.



powerampmodel7125
moreviews
Specifications
Circuit Type Solid State, Class A/B
Power Output

2 x 200 watts @ 8 Ohms
from 20Hz to 20KHz
2 x 350 watts @ 4 Ohms
from 20Hz to 20KHz

Input Sensitivity 1.4 Volts
Frequency Response 10Hz - 50KHz +/- 0.1 dB
Signal-to-Noise Ratio >100dB, "A" Weighted
Input Impedance

44K Ohms RCA-unbalanced

91K Ohms - Balanced (XLR)

Voltage Gain 28 dB
AC Power Requirements 117/234 Volts AC @ 50/60 Hz
Break-In Time 100 hours of playing time
Finish


 Black epoxy coated steel chassis
Silver anodized aluminum faceplate
(black optional)
Weight 78 lbs
Dimensions 7” H x 17.7”W x 19.5 ”D
Audio Input 2 RCA, 2 XLR
Audio Output 2 pairs of heavy-duty, gold-plated binding posts
THD Less than 0.05% at rated output
Crosstalk Greater than -90dB from 20Hz to 20KHz
Damping Factor Greater than 400 from 10Hz to 400Hz
Slew Rate 50V/mSec
Remote Trigger 3-32v DC at 5mA or greater
Rack Mounting Optional brackets are available for mounting the amplifier in a standard 19 inch equipment rack.
Resources

ArrowCinema Series Catalog PDF
 
Highlights

The Model 2.200 power amplifier features include:

  • Single-ended RCA or XLR balanced inputs
  • 200 Watts/8 ohms; 350 Watts/4 ohms
  • Remote trigger (works with +3.3 to +24 Volts DC)
  • Protection against short circuits, device failures, mis-wiring, and internal faults.
  • DC offset protection
  • Matched output transistors
  • High power supply voltage for extra headroom at the outputs
  • Stable with mismatched, reactive or unusual loads
  • Soft start circuit prevents “Brown outs” when amplifier is turned on

In addition, the Model 2.200 includes high quality RCA (gold plated) and XLR input connectors. The Model 2.200 also includes high-quality, heavy duty speaker output connectors. A trigger input connector allows the Model 2.200 to be powered on and off automatically.