| Circuit Type |
Solid State, Class D |
Power Output
|
7 to 12 x 125 watts @ 8 Ohms
250 watts @ 4 Ohms |
| Input Sensitivity |
.7 Volts |
| Frequency Response |
+/- 0.5 dB from 20 Hz to 50 kHz |
| Signal-to-Noise Ratio |
>-80dB CCIR |
| Input Impedance |
100K Ohms - RCA
200K Ohms - XLR |
| Voltage Gain |
27.2 dB |
| AC Power Requirements |
110/117 or 220/234 Volts AC @ 50-60 Hz |
| Break-In Time |
100 hours of playing time |
Finish
|
Black epoxy coated steel chassis
Silver anodized aluminum faceplate
(black optional) |
| Weight |
20 lbs |
| Dimensions |
4.5” H x 17.7”W x 13 ”D |
| Controller Connectors |
3 - 3.5 mm "mini plug" jack for trigger input
4 - custom speaker binding posts |
| Damping Factor |
>1,000 @ 8 Ohms |
| THD+N |
<0.2% |
| Power Consumption |
450 watts - Operation
50 watts - Idle
0.5 watts - Standby |
|
| |
The Model Cinema 11p power amplifier design offers high output power and high efficiency in an attractive small chassis. It is an ideal distribution amplifier for a whole house system which can have up to 12 channels. The Model Cinema 11p is rated at 125 watts per channel into an 8 ohm load, and it is capable of doubling the output power to 250 watts into a 4 ohm load. This type of performance is only possible with rugged, over-designed power supplies. Efficient, musical, and cool running are all great design aspects of the Cinema 11p power amplifier.
|
|
