Go to Top

CAD-805AE Amplifier

  • CAD-805AE Amplifier
  • CAD-805AE Amplifier

About the CAD-805AE Amplifier

The CAD 805 Anniversary Edition offers 50 watts per channel, Pure Class A Single Ended Triode Mono Blocks with dual 6SN7 input stage, 300B driver stage tube, includes both 845 and 211 output tubes. User selector switch for output tube. Jaguar Anthracite black chassis and top plate with clear coat finish, anodized aluminum front panel. ZERO feedback design.

stereophile_recommended

Circuit Type Single-Ended Class A1/A2
Power Output 50 watts
Input Sensitivity 1.0 Volt for full output
Noise and Hum -80 dB below full output
Frequency Response 20 Hz to 20 KHz +/- 0.75 dB
Inputs Single-Ended RCA (Optional Balanced XLR)150 K Ohms input impedance
Tubes 2 ea – 6SN7 Input
1 ea – 300B Driver
1 ea – 845 Output + 1 ea – 211 Output
1 ea – 1629 ‘Cat Eye’ output level tube
Power Transformer 1 ea – EI Laminate, 200% Duty Cycle
Output Transformer(s) 1 ea – EI Laminate, Air Gap, 200% Duty Cycle4, 8 or 16 Ohm speaker connections
Resistors 1% Metal Film
Capacitors Oil-filled Coupling
Power Supply Capacitors 4 ea – 1500µF @ 450 VDC
AC Cord 3 Conductor, Detachable
AC Power Requirements 117/234 VAC @ 50/60 Hz
Consumption 230 watts – Operation
76 watts – Standby
Warm-Up Time 5 Minutes
Break-In Time 100 hours of playing time
Finish Silver Anodized Aluminum Faceplate,Jaguar Anthracite Black chassis and top plate with clear coat finish, steel chassis
Weight 80 lbs
Dimensions 8.5″ H x 12.25″ W x 24 ” D

Resources

Owner's Manual
Visit Site

AVAILABLE UPGRADES: Cardas Caps, Jensen Caps, WBT Speaker Binding Posts, Chassis Paint, Transformer Cans Paint
Visit Site

Review by Michael Lavorgna on 6moons
Visit Site

Review by Sasha Matson on Positive Feedback Online
Visit Site